A Customer Wants Their Logo Engraved on the Antenna — How Does the EMENO Factory Take the Order?

● 2026-11-16 ● - ● Leave me a message
Published: November 11, 2026 Author: EMENO Editorial Team Category: OEM Customization

A Customer Wants Their Logo Engraved on the Antenna — How Does the EMENO Factory Take the Order? Many retail chains have extremely high requirements for store visual consistency. Last week, a purchasing manager from a European clothing brand emailed us: “We are very satisfied with your AM8089, but can you add our brand logo to the acrylic panel?”

A Typical OEM Customization Request for the Acrylic EAS Antenna

This is a typical OEM customization request. EMENO’s AM8089 features a side-cable routing design and is already known for its aesthetics. Adding the customer’s brand identity to the transparent acrylic essentially turns the anti-theft device into a visual extension of the store.

However, for the acrylic AM8089, most customers choose laser engraving instead of standard silk-screen printing. Why? Silk-screen ink tends to wear off and fade over time. Laser engraving, on the other hand, directly carves a frosted groove into the acrylic surface. It’s permanent and won’t fade. Under the top LED lighting, the engraved logo reflects a premium matte texture.

Custom Engraving — Position Matters

The customer sent over their brand logo vector file. EMENO’s sampling workshop first cut two pieces of acrylic sample material identical to the AM8089. In the first engraving attempt, the laser power was set too high, causing the edges to turn yellow and micro-crack. The workshop master adjusted the laser power and cutting speed. The second sample came out perfectly — the frosted effect was just right, the edges were smooth, and you couldn’t feel a thing with your fingernail.

Next was positioning. Actually, on our standard EMENO demo units, the logo is typically engraved at the top — near the LED strip, the frosted logo becomes highly recognizable when the light is on. But this isn’t absolute. Some customers prefer a low-key look and request the logo to be engraved at the bottom, just above the base, feeling it preserves the clean transparency of the whole acrylic panel.

From Sample Approval to the First 100-Unit Batch

We sent sample photos of both the top and bottom engraving positions to the European customer. He replied: “The texture of the laser engraving is so much better than silk-screen. We’ll go with the bottom position so the front looks cleaner. Please produce the first batch of 100 AM8089 units to this standard.”

EMENO not only makes standard AM acoustic-magnetic antennas, but also handles deep customization. Whether it’s engraved at the top or the bottom, making the AM8089 exactly what the customer wants reflects our factory’s manufacturing capabilities.

Step What EMENO Did
Material testing Cut two acrylic samples matching AM8089 panel dimensions; adjusted laser power after first attempt showed yellowing
Position comparison Produced top and bottom engraving samples; sent photos for customer selection
Customer decision Selected bottom position for cleaner front; approved 100-unit production run
Production standard Frosted groove permanent, smooth to touch, no visible edge discoloration

EMENO handles standard AM acoustic-magnetic antennas and deep customization orders. The AM8089 is available with logo engraving at either position. For store installation constraints, the side-cable routing design allows mounting against walls or pillars without cutting floors.

Frequently Asked Questions

Can EMENO engrave a brand logo on the AM8089 acrylic antenna?

Yes. EMENO offers OEM laser engraving on the AM8089 acrylic panel. The process uses a frosted groove carved directly into the acrylic surface, which is permanent and does not fade like silk-screen ink. Customers provide a vector logo file, and EMENO’s sampling workshop tests laser parameters before production.

Where is the logo usually engraved on the AM8089?

The standard position is near the top of the acrylic panel, close to the LED strip, where the frosted engraving becomes highly visible when the light is on. EMENO also produces bottom-position engravings for customers who prefer a cleaner front appearance. Both positions are sampled and photographed for customer approval before production.

Is laser engraving more durable than silk-screen printing on acrylic?

Yes. Laser engraving carves a permanent frosted groove into the acrylic itself. Silk-screen ink sits on the surface and can wear off or fade with cleaning and handling. For retail environments where the antenna is wiped regularly, laser engraving maintains its appearance far longer.

What is the minimum order for a customized AM8089 antenna?

EMENO handles customization orders starting from small first batches. In this case, the customer approved a first production run of 100 units. The factory-direct model allows low MOQ customization without requiring large-volume commitments before the customer validates the engraving standard.

Does the AM8089 support side-cable routing for stores that cannot cut floors?

Yes. The AM8089 features a side-cable routing design specifically for stores that cannot or prefer not to cut into their floors. Cables run along the baseboard when the antenna is mounted against a wall or pillar, preserving the floor surface and reducing installation cost.



EMENO

Have a logo or brand customization request for your EAS antennas? Send your vector file and store requirements. EMENO will return a sampling plan and production timeline within 24 hours.

Send Your Customization Inquiry

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy